Lead free solder paste no clean Sn96,5Ag3Cu0,5, 10cc syringe C5 + plunger
· Alloy Sn96.5Ag3Cu0.5 (96.5% tin, 3% silver and 0.5 copper)
· Melting temperature 217 ° C
· Packaging in 10cc syringe with or without pusher, or in cartridge of 170cc (0.5kg)
· 12% no cleaning flow
· Packaging in 10 cc syringe or 0.5 kg cartridge
Available packaging:
- 10 cc lead-free alloy syringe - Class 5 (ref F42240)
- 10 cc syringe + plunger, lead-free alloy - Class 5 (ref F42241)
- 55 cc syringe, lead-free alloy - Class 5 (ref V800120)
- Jar of 500g, lead free - Class 5 (ref F42243)
- Cartridge 500 gr, lead-free - Class 5 (ref F42244)
- 10 cc syringe + plunger, lead-free alloy - Class 6 (ref F42245)
- Jar of 500g, lead free - Class 6 (ref F42247)
Solder paste Lead-free alloy, low temperature, liquidus 189 °C
Available packaging:
- Pot of 500g, lead-free- Class 5 (ref V800224)
- Cartridge 500 gr, lead-free - Class 5 (ref V800225)
- Pot of 500g, lead-free - Class 4 (ref V800125)
- Cartridge 500 gr, lead-free - Class 4 (ref V800126)
The paste or solder paste is used for SMT soldering. It consists of an alloy and a flow whose characteristics are identical to those used for a wave or with an iron.
The alloy is composed of spherical balls whose size from 20 to 160 μm gives the particle size and class.
Classification according to the JEDEC J-STD005 standard:
Class 1, diameter in μm: 150 to 75
Class 2, diameter in μm: 75 to 45
Class 3, diameter in μm: 45 to 20
Class 4, diameter in μm: 38 to 20
Class 5, diameter in μm: 25 to 15
Class 6, diameter in μm: 15 to 5
Class 7, diameter in μm: 11 to 2
Class 8, diameter in μm: 8 to 2
The class allows better control over the quantity and the definition of the deposit in the case of Fine Paste or Fine Pitch.
The syringes are used for a point-by-point deposit (pusher, manual doser, automatic doser). Pots or cartridges for a silkscreen deposit.
Hazardous products subject to specific transport regulation.