Programmable manual dispenser CMS 450.V2 DOTTY
- Professional device for glues, pastes and low viscosity products dispensing.
- The DOTTY CMS 450.V2 dispenser can operate independently or in combination with a placement station.
- The DOTTY dispenser can work under many different ways :
· Manual: Pushing on the pedal, the product deposit will be done when the control is done. Getting of the pedal will stop the deposit
· Semi-automatic: Pushing on the pedal, a x quantity of deposit is done once. You need to push again on the pedal to start a new deposit.
· Automatic : Remaining on the pedal, a x quantity deposit is done every x repetitions until the pedal is getting of.
·Learning : This programm automatically defines deposit and repetition times according to work to do. You just need to make 10 manual deposits depending on the requested rate and the unit will analyse, making an average of appropriate times. Once learning mode is finished, the unit will get back to automatic mode.
·Component: Allows you to memorize a sequence of 99 steps per learning mode (eg creation of C.I. 10 memories of P0 to P9 are accessible.
Features and benefits
• Immediate handling
• Light and ergonomic
• 5 programming modes : manual, semi-automatic, automatic, learning & component
• Versatile, all types of products
• Memorizing 10 programs
The dispensers are delivered complete wit a set of needles, and a foot pedal control.
To be connected to a compressed air network or on a compressor.
Technical specifications
Available use modes 5
Manual Yes
Semi-automatic Yes
Automatic Yes
Learning Yes
Component Yes
Max. pressure 10 bars at the inlet
Power 10 W
Sound level < 40 dB (A)
Using pressure 0,1 to 7 bars
External dim. L x l x H (mm) 250 x 140 x 140 mm
Net weight 1,8 Kg
Power supply 230 V – 50 Hz