Direct Laser DCT DL300 Model

Reference DL

Modèle : DL300B - Laser IR

Quantity

Add to wishlist

This machine is available in 3 versions according to the type and power of the laser.

Suitable for structuring conductive pattern on copper plate, removing solder resist, removing additional line, cover layer(CVL) cutting; also suitable for structuring other metal such as rare metal, electroplating material, film and coating material, plastic and ceramic.

Features

• IPG Filber laser with laser housing, air cooling,

• Granite X/Y table, bridge construction,

• Data processing software: CircuitCAM 7 Laser Plus

• Visionsystem with high resolution camera and reflectance light resource

• Camera supported positioning system with fiducial recognition

• X/Y/Z axises driven by high precision Servo motor for DL300B & linear motor for DL300G

• Class C5 ball screw for X,Y,Z axises

• Digital scanning galvanometer (made in Germany)

• Telecentric lense

• Movable stand hood

• Industrial control PC and display

• Industrial dust exaust unit

• Vacuum table for material

• Heat dissipation: inlet air from front and back, bilateral exhaust ventilation

• With lens protection

• Fully sealed optical path

Reference U900042

Specific References

ean13: 3664131026536

Model	DCT DL300G	DCT DL300B	DCT DL300B-Adv
Reference	U900043	U900042	U900044

Working area	300 x 300 mm
Min. line width	20 µm
Min. gap width	25 µm	35 µm	35 µm
Processing speed	30 cm² / min	20 cm² / min	20 cm² / min
Motion system	Moteur linéaire	Servo moteur
Accuracy of repeatability	± 2 µm
Position accuracy	± 5 µm
Resolution of galvanometer	1 µm
Laser type	Laser vert	Laser CAS	Laser IPG
Laser Wavelength	532 nm	1064 nm	1064 nm
Laser pulse frequency	20 - 80 kHz
Laser type	Green Laser	CAS Laser	IPG Laser
Average output of laser	35 W	30 W	20 W
Travelling resolution of X/Y table	0.5 µm
Automatic stop function upon door opening	Oui
Air pressure	Not required
Cooling	Builtin chiller	Air
Weight	700 Kg	270 Kg
Dimensions (L x W x H)	1207mm×917mm×1720mm	850 x 900 x 1450 mm